I drilled and tapped the front of the Optec wide field holder with the same pattern as the camera end of the AO-7
I then screwed the AO-7 housing to the Optec housing with the 4-40 screws that came with the AO-7
The SCT side of the AO-7 housing, I installed a 2" to SCT adapter, this end will go into the Optec Focuser.
I then removed the camera from the focuser
I put the AO-7 into the focuser and then the camera and F5 reducer into the holder.
The setup is very ridged, but I'm not sure if the setup will come to focus.
As soon as I get a clear night I will test